Açıklama
- [PROTECTIVE ARMOR] BMPCC 6K Pro/G2 için Zaman İçinde Aşınma ve Yıpranmayı En Aza İndirir
- [MOUNT ACCESSORIES] NATO Rayı, Arri Uyumlu Rozetler, Soğuk Yuva Alıcıları, Yerleştirme Pimli 1/4"-20 Dişler aracılığıyla
- [QUICK RELEASE TOP HANDLE] Kullanım ve Taşıma Sırasında Daha Fazla Esneklik Sağlar
- [RECORD TO SSD] Samsung T5 Sürücü Tutucu ve Monte Edilebilir USB-C Kablosu aracılığıyla
- [15MM ROD SUPPORT] Pil Kavrama Uzatma Braketi Kullanırken
Kameranızı Blackmagic Pocket Cinema Camera 6K Pro ve 6K G2 için Tiltaing Kamera Kafesi ile donatın.
BMPCC6K Pro/G2 için bu Temel Kit, kamera gövdesi için koruyucu zırh sağlar ve işlevselliği artırmak için bazı ilgili aksesuarları içerir.
Tam Kafes, yerleştirme pimleri, soğuk pabuç alıcıları, Tip IV ve VI Yan Kollar için bir NATO Rayı ve Tek Çubuk Tutucularımız için Çubuk Bağlantı Portları ile birkaç 1/4 “-20 diş sunar.
Ayrıca, daha esnek kullanım ve taşıma için Ayarlanabilir Üst Sap Plus’ımız için özel olarak tasarlanmış ARRI uyumlu rozetlere sahiptir.
Bu Tam Kafesi Yarım Kafese dönüştürmek için sağ yan kol modülü çıkarılabilir.
Bu, gimbal kullanımı gibi daha hafif yapıların gerekli olduğu durumlarda daha fazla esneklik sunar.
Alt Plaka, kameranızı çeşitli hızlı serbest bırakma plakalarına takmak için birkaç ¼”-20 montaj noktası sağlar ve RS2 Montaj Plakasının ARCA Alıcısıyla uyumludur.
Yarım Kafes kullanıldığında, alt plaka Black Magic Design Battery Grip’i desteklemek için uzatılabilir.
Pil Tutucuyu Yarım Kafes kurulumunda kullanırken kamera gövdesinin önündeki 15 mm çubukları desteklemek için ürünle birlikte verilen 15 mm çubuk yuvası takılabilir.
Ürünle birlikte verilen Hızlı Açılan Üst Tutamak, bir soğuk yuva alıcısı ve ¼”-20 vida aracılığıyla kafesin üstüne takılabilir.
Bu, kamera sisteminizi rahatça kullanmak ve çalıştırmak için son derece güvenli bir bağlantı sağlar.
Üst Sapta ek ¼”-20 dişler, soğuk yuva alıcıları ve harici monitörleri veya EVF’leri monte etmek için yatay 15 mm çubuk tutucu bulunur.
SSD Sürücü Tutucu, 1/4″-20 vida ve yerleştirme pimi aracılığıyla doğrudan Kafese takılır.
Daha sonra bir Samsung T7 SSD sürücüye takılarak kamera kurulumunuza sabitlenebilir ve çekimleri ayrı bir SSD karta kaydetmenize olanak tanır.
Ürünle birlikte verilen USB-C kablosu, SSD Tutucusuna ve Kafesin USB-C Bağlantı Noktasının yanındaki Yan Paneline vidalanabilir.
Bu, kameranız ve sürücünüz arasında son derece güvenli bir bağlantı oluşturur.
90 Derece HDMI Adaptörü, kameranın HDMI bağlantı noktasının yanındaki kafese takılır ve bağlantı noktasının aşınmasını sınırlayan güvenli bir bağlantı sunar.
NOT: T7 Tutucu içeren bir kit alırsanız, lütfen sales-de@tilta.com adresinden bizimle iletişime geçin.
Tilta came out of the gate, being the first to offer cage support for the battery grip. However, be aware that on the bottom there is only ONE 1/4″ thread that is in the center of the lens. Most people who get a rig will build it out enough where the weight will rotate the camera after normal use. It didn’t take much for the cam to swing left and right. Other than that, the build quality and versality is pretty great. Now, being close to end of 21, it didn’t take long for smallrig to not only catch up with a full battery grip cage offering. Additionally, they are now pre-releasing a cage that secures around just the camera, and allows you to pop on and off the battery grip (SM3517). Returning my tilta for this one.
Im disappointed that its only a half cage when using the battery pack. However, its a good product.
Overall the Cage is a winner. Delivery was timely-ish considering I live in Ireland. And the cage is functional, well made and finished beautifully.
I have two gripes; firstly the basic kit comes with a SSD holder which is partly the reason I upgraded to the basic kit. However the SSD holder is for the Samsung T7 not the T5… This is something that I missed when purchasing (so my bad) but in my opinion its a pretty easy mistake to make given that the T7 drive is not supported by the BMPCC6KP and the drives have the difference of a letter in their two names (T5 vs T7)…all this amounts to me now having a drive holder (which I paid for) which doesn’t fit my current SSD and doesn’t fit an SSD supported by the camera system….EHHHHH
Secondly, when you use the strain relief cables for the HDMI and USB-C ports it makes plugging OUT the Dtap power cable impossible without removing the USB-C cable (which means unscrewing) which is totally unpractical in every way.
Is there a workaround for this problem?
Apart from those two significant issues…The cage is great
In principle I like this cage as I will use this camera 90% of the time with the additional battery grip and this allows me to do that over other cages (looking at you smallrig).
That said, It’s only a half cage in this mode and there’s no quick way to switch between battery grip on and battery grip off which is a little annoying.
More annoying than anything though is just how snug everything is. It takes me an age to get the t7 drive into the holder as it’s been cut just toooooooo tight. an extra 1/2mm would literally change everything – it looks anyway – it weren’t gonna slip.
In addition to that the cold-shoe mounts suffer from the same issue of being cut so exact there’s little room for actually getting cold-shoe mounting things into it without fear of breaking it.
The same can be said of the usbc and hdmi adapter.
So whilst I like having a cage, I do not think this is the best one as it has some manufacturing issues that suggest, whilst technically and mechanically correct, it skipped the practical user-testing to iron out some very annoying and frequently noticeable issues.
I hope Titla see this review and look into this as they are such simple fixes to overcome.
(I will however say that I’ve had 0 issues using the actual t7 drive with my BMPCC6kPro – recorded 4 projects on it now and it hasn’t let me down once)
The HDMI angle adapter does not fit well. My 90-degree USB-C cable has connectivity quality issue.