Description
- [PROTECTIVE ARMOR] pour BMPCC 6K Pro/G2 minimise l'usure au fil du temps
- [MOUNT ACCESSORIES] via Rail NATO, Rosettes compatibles Arri, Récepteurs Cold Shoe, Filets 1/4"-20 avec goupilles de positionnement
- [QUICK RELEASE TOP HANDLE] Une plus grande souplesse d'utilisation et de manipulation
- [RECORD TO SSD] via le support de disque Samsung T5 et le câble USB-C montable
- [15MM ROD SUPPORT] Lors de l'utilisation du support d'extension de la poignée de batterie
Armez votre caméra avec la cage de caméra Tiltaing pour la Blackmagic Pocket Cinema Camera 6K Pro et 6K G2.
Ce kit de base pour le BMPCC6K Pro/G2 fournit une armure de protection pour le corps de la caméra et comprend quelques accessoires pertinents pour améliorer la fonctionnalité.
La cage complète offre plusieurs filetages 1/4″-20 avec des goupilles de positionnement, des récepteurs de patins à froid, un rail OTAN pour les poignées latérales de type IV et VI, ainsi que des orifices de fixation de canne pour nos porte-cannes simples.
Il est également équipé de rosettes compatibles ARRI, spécialement conçues pour notre poignée supérieure réglable Plus, pour une plus grande souplesse d’utilisation et de manipulation.
Le module du bras droit peut être retiré pour transformer cette cage complète en demi-cage.
Cela offre une plus grande flexibilité dans les situations où des constructions plus légères sont nécessaires, par exemple lors de l’utilisation d’un cardan.
La plaque inférieure fournit plusieurs points de montage ¼”-20 pour fixer votre caméra à diverses plaques de fixation rapide et est compatible avec le récepteur ARCA de la plaque de montage RS2.
Lorsque vous utilisez la demi-cage, la plaque inférieure peut être étendue pour supporter la poignée de batterie Black Magic Design.
Un support de tige de 15 mm inclus peut être installé pour soutenir les tiges de 15 mm devant le boîtier de l’appareil photo lors de l’utilisation de la poignée de batterie dans la configuration demi-cage.
La poignée supérieure à dégagement rapide incluse peut être fixée au sommet de la cage par l’intermédiaire d’un récepteur de chaussure froide et d’une vis ¼”-20.
Il s’agit d’une connexion extrêmement sûre qui permet de manipuler et d’utiliser confortablement votre système de caméra.
La poignée supérieure comporte des filetages ¼”-20 supplémentaires, des récepteurs de griffe froide et un support de tige horizontale de 15 mm pour le montage de moniteurs externes ou de viseurs.
Le support de disque SSD se fixe directement à la cage à l’aide d’une vis 1/4″-20 et d’une goupille de positionnement.
Il peut ensuite se fixer sur un disque SSD Samsung T7, l’attachant à votre caméra et vous permettant d’enregistrer des séquences sur une carte SSD séparée.
Le câble USB-C inclus peut se visser dans le support SSD et le panneau latéral de la cage, près du port USB-C.
Cela crée une connexion extrêmement sécurisée entre votre appareil photo et votre lecteur.
L’adaptateur HDMI à 90 degrés se monte sur la cage près du port HDMI de l’appareil photo et offre une connexion sécurisée qui limite l’usure du port lui-même.
REMARQUE : Si vous recevez un kit avec un support T7, veuillez nous contacter à l’adresse suivante : sales-de@tilta.com
Tilta came out of the gate, being the first to offer cage support for the battery grip. However, be aware that on the bottom there is only ONE 1/4″ thread that is in the center of the lens. Most people who get a rig will build it out enough where the weight will rotate the camera after normal use. It didn’t take much for the cam to swing left and right. Other than that, the build quality and versality is pretty great. Now, being close to end of 21, it didn’t take long for smallrig to not only catch up with a full battery grip cage offering. Additionally, they are now pre-releasing a cage that secures around just the camera, and allows you to pop on and off the battery grip (SM3517). Returning my tilta for this one.
Im disappointed that its only a half cage when using the battery pack. However, its a good product.
Overall the Cage is a winner. Delivery was timely-ish considering I live in Ireland. And the cage is functional, well made and finished beautifully.
I have two gripes; firstly the basic kit comes with a SSD holder which is partly the reason I upgraded to the basic kit. However the SSD holder is for the Samsung T7 not the T5… This is something that I missed when purchasing (so my bad) but in my opinion its a pretty easy mistake to make given that the T7 drive is not supported by the BMPCC6KP and the drives have the difference of a letter in their two names (T5 vs T7)…all this amounts to me now having a drive holder (which I paid for) which doesn’t fit my current SSD and doesn’t fit an SSD supported by the camera system….EHHHHH
Secondly, when you use the strain relief cables for the HDMI and USB-C ports it makes plugging OUT the Dtap power cable impossible without removing the USB-C cable (which means unscrewing) which is totally unpractical in every way.
Is there a workaround for this problem?
Apart from those two significant issues…The cage is great
In principle I like this cage as I will use this camera 90% of the time with the additional battery grip and this allows me to do that over other cages (looking at you smallrig).
That said, It’s only a half cage in this mode and there’s no quick way to switch between battery grip on and battery grip off which is a little annoying.
More annoying than anything though is just how snug everything is. It takes me an age to get the t7 drive into the holder as it’s been cut just toooooooo tight. an extra 1/2mm would literally change everything – it looks anyway – it weren’t gonna slip.
In addition to that the cold-shoe mounts suffer from the same issue of being cut so exact there’s little room for actually getting cold-shoe mounting things into it without fear of breaking it.
The same can be said of the usbc and hdmi adapter.
So whilst I like having a cage, I do not think this is the best one as it has some manufacturing issues that suggest, whilst technically and mechanically correct, it skipped the practical user-testing to iron out some very annoying and frequently noticeable issues.
I hope Titla see this review and look into this as they are such simple fixes to overcome.
(I will however say that I’ve had 0 issues using the actual t7 drive with my BMPCC6kPro – recorded 4 projects on it now and it hasn’t let me down once)
The HDMI angle adapter does not fit well. My 90-degree USB-C cable has connectivity quality issue.