SPEDIZIONE GRATUITA in Europa per ordini superiori a 150 € (Esclusi gli ordini che richiedono la spedizione dalla Cina). Si applicano termini e condizioni.

Leggi di più →
-10%

Supporto LWS da 15 mm per Tilta Mirage

2 recensioni

UVP: -10%26,10 
31,06  IVA inclusa

Solo 1 pezzi disponibili (ordinabile)

COD: MB-T16-LS Categoria:
EAN 6972835238269

Returns are accepted within 21 days, with some exceptions. Per saperne di più →



Descrizione

  • [DUAL ROD SUPPORT] Crea una connessione sicura per montare il Mirage
  • [LOCATING PINS] Evita rotazioni indesiderate quando monti la scatola Matte
  • [LIGHTWEIGHT] Il design aggiunge un supporto all'asta limitando il peso aggiuntivo.
  • [FAST ASSEMBLY] Consente di collegare o rimuovere rapidamente l'adattatore tramite una vite a testa zigrinata.
  • [DURABLE] Struttura in alluminio e acciaio inox

Il supporto LWS da 15 mm per Tilta Mirage ti permette di montare la Matte Box sul tuo sistema fotografico tramite due aste da 15 mm.

Questa è la soluzione perfetta per aggiungere un’ulteriore sicurezza quando il peso è meno importante o quando si utilizzano obiettivi che non supportano la funzionalità di aggancio del Mirage.

(1) 15mm LWS Support for Tilta Mirage

Dimensions: 11.43 x 10.16 x 7.62 cm

Weight: 0.1 kg

Materials: Aluminum alloy, stainless steel

Colour: Black

Optional Accessories

Aggiungi una recensione
Supporto LWS da 15 mm per Tilta Mirage Supporto LWS da 15 mm per Tilta Mirage
Valutazione*
0/5
* La valutazione è necessaria
* Title is required
La tua recensione *
* La recensione è necessaria
Nome *
* Il nome è necessario
Aggiungi foto o video alla tua recensione

Customer Reviews

4,0
Basato su 2 recensioni
5 stelle
50
50%
4 stelle
0%
3 stelle
50
50%
2 stelle
0%
1 stella
0%

Fai una domanda

Grazie per la tua domanda!

Your question has been received and will be answered soon. Please do not submit the same question again.

Errore

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Aggiungi una risposta

Grazie per la tua risposta!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Errore

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

1-2 of 2 reviews
  1. JP
    JP
    Just what I needed

    This was a savior for my setup. Not only holds the matte box but it also helps you to hold and secure your lenses between the camera and matte box. Super handy

    (0) (0)
  2. DS
    DS
    Solid Matte Box Support, but Poor Spacing for Dovetail Plates

    The support is exactly what it says – this screws in to the base of the Mirage Matte Box and has a height-adjustable bracket to connect to a pair of 15mm rods below. It’s well-made and solid.
    The problem is that if you are using a Tilta 15mm dovetail rail with your rig, the bottom of the support bracket does not clear the safety screw on the front of the dovetail, which means you either have to remove the safety screw or you can’t move the rig forward on the dovetail to balance it properly. I much preferred the single-side support from the Mini Matte Box, because it doesn’t interfere with the safety screw on the dovetail.
    If you aren’t using the LWS base/dovetail system, then this will not be an issue.

    (0) (0)

D
Donald 11/29/2022
I purchased the mirage kit and want to use the included LWS Support. I use a below camera slide-in SSD magazine that adds some distance from camera bottom to the standard LWS Rod baseplate. When I try to use the LWS support the height adjustment is just out of range. I tried adding a manfrotto quick release base plate but now the adjustment is too far the other way. Do you sell any other support that would have a larger adjustment? Any suggestions?
T
Tilta answered on 11/30/2022

We do not sell anything that could specifically help in this situation, but you could use something like this to increase the height of your rods! https://www.bhphotovideo.com/c/product/1406494-REG/camvate_c1690_height_riser_offset_railblock.html/?ap=y&ap=y&smp=y&smp=y&lsft=BI6879&gclid=Cj0KCQiA-JacBhC0ARIsAIxybyPpRrRu-eTMr4u9ZlY74jQ45ZuLXPaHYr3R8fnso41lV-KUlwIOcO4aAtJzEALw_wcB

(0) (0)
D
Alvaro 11/16/2022
If the screw it's not 1/4"-20 standard (as I've read in a previous answer), is there a way to adapt it to 1/4"-20 standard gadgets (ex. Matebox and others)?Thanks in advance ;)
T
Tilta answered on 11/16/2022

This might be possible, however, given the size of this screw and the relative insecurity of mounting it to a 1/4-20 adapter, it would be a better option to only use this adapter with the Mirage Matte Box and to use a different 3rd party 15mm LWS Rod Mount that features a native 1/4-20!

(0) (0)
D
Alvaro 11/15/2022
HelloWhat is the distance between each rod hole?Thanks
T
Tilta answered on 11/15/2022

They use 15mm LWS Standard spacing! (60mm)

(0) (0)
D
Michael G. 05/02/2022
Dear TiltaIs the screw on the 15mm LWS Support for Tilta Mirage a 1/4 20 screw and the pins exactly similar to Arri locating pins?best regards,Michael Greive
T
Tilta answered on 05/03/2022

No this screw is smaller than 1/4-20 and the locating pins are not ARRI standard

(0) (0)

Fai una domanda

Grazie per la tua domanda!

Your question has been received and will be answered soon. Please do not submit the same question again.

Errore

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Aggiungi una risposta

Grazie per la tua risposta!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Errore

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: