Description
- [SWING AWAY] La conception permet un changement d'objectif rapide et efficace
- [4x5 .65 FILTERS] Supporté par deux plateaux de filtre 4x5.65
- [FLARE CONTROL] via Trois drapeaux français inclus
- [HARD MATTES] Couvre les distances focales entre 16 mm et 180 mm
- [ROD SUPPORT] pour les systèmes 15mm LWS et 19mm
Cette boîte matte 4×5.65 en fibre de carbone est dotée d’une conception pivotante pour faciliter le changement d’objectif.
Deux étages de filtration permettent d’utiliser plusieurs filtres à la fois, dont l’un est orientable à 360 degrés.
Des fixations pour cannes de 15 mm LWS et 19 mm sont incluses pour vous permettre d’adapter la matte box au système de cannes de votre choix.
L’ensemble comprend également plusieurs mattes dures qui fournissent une couverture contre les éblouissements pour toutes les longueurs focales entre 16 mm et 180 mm.
Si l’on y ajoute les trois drapeaux français qui sont également inclus, on obtient une quantité presque infinie de couvertures de flammes.
Veuillez noter que cette Matte Box n’est pas compatible avec les plateaux de dioptries.
De plus, la hauteur de l’adaptateur de tige LWS de 15 mm nécessitera le montage de la Matte Box à l’avant de vos tiges de 15 mm.
the mattebox is built like a tank and it’s nice to use the mattebox. it’s the well known tilta quality and design, which is very pleasing. The one and only issue ist the construction of the 15mm adapter. using it means the 15mm rods will hit the mattebox body and get blocked by the mattebox. if you change the lens to something shorter, you need to replace the 15mm rods on your rig. the same if you use a longer lens. Problem b is that the distance from the rods to the center of the lens is absolutelely minimum and the mattebox is only usable in the lowest of all positions. So if the distance between your rods and your lens ist variing you cant use this mattebox and it becomes useless. you could fix the problem with a riser tray, ra. 1/3 or 1/2 of the 19mm riser which is included. but its not and you cant 3D print it because its on a very fragile positon. sorry tilta, but for a 1k $ Mattebox which says 15mm Rod Adapter included and the answer from the tilta support “it is like it is, we can’t fix the problem” thats not good to keep your clients. Most of them are B2B users and they can’t return it. very dissapointing, please remove the 15mm adapter or fix it!!!
so its an awesome Mattebox overall. built like a tank. A bit overly heavy, but it’ll hold up. It would be nice if some of the excess metal would come off but at least it’s all mounting points. My real complaint is that the 15mm rod adapter needs a half or 1 inch riser so that it could clear the trays. which doesn’t come with it(and may not exist) hell even a 1/4in would give it enough. as is, it hits the step down trays making it pretty useless on most 15mm builds unless you use your own neoprene lens stepdown. This also means swapping to different prime lengths means readjusting your rod length. If i can’t find a riser or have one machined, this may be my first Tilta return.
I am a 10 year Assistant Camera within the IATSE 600.