Descrizione
- [PROTECTIVE ARMOR] per BMPCC 6K Pro/G2 Riduce al minimo l'usura nel tempo
- [MOUNT ACCESSORIES] via guida NATO, rosette compatibili Arri, ricevitori Cold Shoe, filettature 1/4"-20 con perni di posizionamento
- [QUICK RELEASE TOP HANDLE] Offre una maggiore flessibilità durante l'utilizzo e la movimentazione
- [RECORD TO SSD] tramite il supporto per unità Samsung T5 e il cavo USB-C montabile
- [15MM ROD SUPPORT] Quando si utilizza la staffa di estensione del Battery Grip
Armati con la Tiltaing Camera Cage per Blackmagic Pocket Cinema Camera 6K Pro e 6K G2.
Questo kit di base per la BMPCC6K Pro/G2 fornisce un’armatura protettiva per il corpo macchina e include alcuni accessori importanti per migliorare la funzionalità.
La gabbia completa offre diverse filettature da 1/4″-20 con perni di posizionamento, ricevitori per la scarpetta fredda, una guida NATO per le impugnature laterali di tipo IV e VI, nonché porte di attacco per i nostri portacanne singoli.
Inoltre, è dotato di rosette compatibili con ARRI, progettate appositamente per la nostra Impugnatura Superiore Regolabile Plus per un utilizzo e una gestione più flessibili.
Il modulo del braccio destro può essere rimosso per trasformare questa gabbia completa in una mezza gabbia.
Questo offre una maggiore flessibilità nelle situazioni in cui sono necessarie costruzioni più leggere, come nel caso dell’utilizzo di un gimbal.
La piastra inferiore offre diversi punti di montaggio da ¼”-20 per fissare la fotocamera a varie piastre a sgancio rapido ed è compatibile con il ricevitore ARCA della piastra di montaggio RS2.
Quando si utilizza la mezza gabbia, la piastra inferiore può essere estesa per sostenere il Battery Grip di Black Magic Design.
Un supporto per aste da 15 mm incluso può essere installato per sostenere le aste da 15 mm davanti al corpo macchina quando si utilizza il Battery Grip nella configurazione Half Cage.
L’impugnatura superiore a sgancio rapido in dotazione può essere fissata alla parte superiore della gabbia tramite un ricevitore a slitta fredda e una vite da ¼”-20.
In questo modo si ottiene una connessione estremamente sicura per gestire e utilizzare comodamente il sistema di telecamere.
L’impugnatura superiore presenta filettature aggiuntive da ¼”-20, ricevitori cold shoe e un supporto orizzontale per asta da 15 mm per il montaggio di monitor esterni o EVF.
Il supporto per unità SSD si fissa direttamente alla gabbia tramite una vite da 1/4″-20 e un perno di posizionamento.
Può quindi agganciarsi a un’unità SSD Samsung T7, fissandola alla tua videocamera e consentendoti di registrare le riprese su una scheda SSD separata.
Il cavo USB-C incluso è in grado di avvitarsi al supporto dell’SSD e al pannello laterale della gabbia vicino alla porta USB-C.
In questo modo si crea una connessione estremamente sicura tra la fotocamera e l’unità.
L’adattatore HDMI a 90 gradi si monta sulla gabbia vicino alla porta HDMI della videocamera e offre una connessione sicura che limita l’usura della porta stessa.
NOTA: Se ricevi un kit con un supporto T7, contattaci all’indirizzo: sales-de@tilta.com.
Tilta came out of the gate, being the first to offer cage support for the battery grip. However, be aware that on the bottom there is only ONE 1/4″ thread that is in the center of the lens. Most people who get a rig will build it out enough where the weight will rotate the camera after normal use. It didn’t take much for the cam to swing left and right. Other than that, the build quality and versality is pretty great. Now, being close to end of 21, it didn’t take long for smallrig to not only catch up with a full battery grip cage offering. Additionally, they are now pre-releasing a cage that secures around just the camera, and allows you to pop on and off the battery grip (SM3517). Returning my tilta for this one.
Im disappointed that its only a half cage when using the battery pack. However, its a good product.
Overall the Cage is a winner. Delivery was timely-ish considering I live in Ireland. And the cage is functional, well made and finished beautifully.
I have two gripes; firstly the basic kit comes with a SSD holder which is partly the reason I upgraded to the basic kit. However the SSD holder is for the Samsung T7 not the T5… This is something that I missed when purchasing (so my bad) but in my opinion its a pretty easy mistake to make given that the T7 drive is not supported by the BMPCC6KP and the drives have the difference of a letter in their two names (T5 vs T7)…all this amounts to me now having a drive holder (which I paid for) which doesn’t fit my current SSD and doesn’t fit an SSD supported by the camera system….EHHHHH
Secondly, when you use the strain relief cables for the HDMI and USB-C ports it makes plugging OUT the Dtap power cable impossible without removing the USB-C cable (which means unscrewing) which is totally unpractical in every way.
Is there a workaround for this problem?
Apart from those two significant issues…The cage is great
In principle I like this cage as I will use this camera 90% of the time with the additional battery grip and this allows me to do that over other cages (looking at you smallrig).
That said, It’s only a half cage in this mode and there’s no quick way to switch between battery grip on and battery grip off which is a little annoying.
More annoying than anything though is just how snug everything is. It takes me an age to get the t7 drive into the holder as it’s been cut just toooooooo tight. an extra 1/2mm would literally change everything – it looks anyway – it weren’t gonna slip.
In addition to that the cold-shoe mounts suffer from the same issue of being cut so exact there’s little room for actually getting cold-shoe mounting things into it without fear of breaking it.
The same can be said of the usbc and hdmi adapter.
So whilst I like having a cage, I do not think this is the best one as it has some manufacturing issues that suggest, whilst technically and mechanically correct, it skipped the practical user-testing to iron out some very annoying and frequently noticeable issues.
I hope Titla see this review and look into this as they are such simple fixes to overcome.
(I will however say that I’ve had 0 issues using the actual t7 drive with my BMPCC6kPro – recorded 4 projects on it now and it hasn’t let me down once)
The HDMI angle adapter does not fit well. My 90-degree USB-C cable has connectivity quality issue.