Descrizione
- [CAMERA COMMUNICATION] per regolare impostazioni come ISO, velocità dell'otturatore e frequenza dei fotogrammi via Wifi, Bluetooth e USB-C
- [MULTIPLE MOTORS] Può essere controllato dal volantino, con opzioni di espansione che supportano fino a 4 motori quando si utilizza la maniglia di controllo (opzionale).
- [LENS MAPPING] Visualizza le informazioni sulla distanza focale in tempo reale per una messa a fuoco più accurata.
- [COMPATIBLE] con Nucleus M, Nano, DJI Focus Motors, DJ Ronin S Series Gimbals, così come con le fotocamere Canon, Sony e Blackmagic Design.
- [TOUCH SCREEN] Il display offre un facile accesso alle funzioni avanzate e semplifica il flusso di lavoro sul set
HINWEIS: LA MANO NON DEVE ESSERE UTILIZZATA SU P-TAP
Il Nucleus Nano II – Wireless Lens Control System è l’ultimo strumento per tutti i cineasti che desiderano avere un controllo preciso sui loro obiettivi.
Con il nuovo e migliorato Handrad, l’utente può utilizzare l’Hauptwahlrad per l’impostazione dello Schärfe, mentre la nuova Steuerwippe, con le funzioni Zoom o Blenden, si basa su una Wippe gedämpfte, che è perfetta per l’inserimento e l’integrazione degli Zoom.
La navigazione all’interno del sistema non è mai stata così semplice come con il nuovo display touchscreen da 1,6 pollici e l’ampio display superiore, che consente di accedere a una serie di funzioni più complesse, come ad esempio le funzioni per la gestione degli oggetti e le funzioni per la gestione della videocamera.
Con la Nano II è possibile collegare le installazioni di fotocamere in modo semplice tramite WiFi, Bluetooth e USB-C-Anschluss des Motors per sistemi di fotocamere compatibili come Canon, Sony e Black Magic Design e utilizzare fino a tre motori per Fokus, Blende, Zoom e Mirage VND, a condizione che si utilizzi uno Steuergriff mitgelieferten.
Questo dispositivo è utilizzabile con un Akku della serie L di Sony (F550/570) e può essere utilizzato per aumentare la durata di vita dell’Akkus. Inoltre, è possibile scegliere un Fokusrad nella parte anteriore, con il quale possono essere installati sia i motori della Nucleus-Serie che il motore DJI-Fokusmotor e il Drahtloses Empfängermodul opzionale (non incluso nella confezione). Può essere utilizzato anche per utilizzare il DJI RS2 o RS3 Pro.
Il Griff si basa su una vite da 1/4″-20 con punte di Aufnahmepunkten, che sono perfette per il montaggio delle nostre Rosettenadapters, così come su un Kaltschuh-Empfänger, che può essere utilizzato con la nostra Cold Shoe Befestigung opzionale, per ottenere, in combinazione con la manopola, un’ottima postazione per il fuoco.
Tieni presente che l’ultimo firmware è stato sviluppato per BMPCC 4K, 6K, 6K Pro e per Sony FX3, A7S3, A7R5, ZV-E1, ZV-E10 e Canon R7 per quanto riguarda le impostazioni come Run/Stop, Verschlusszeit, ISO e Blende, mentre Run Stop è stato sviluppato per i sistemi di ripresa einschließlich aller oben genannten sowie Sony A7C, A7M4, A7R3, Canon R6M1, Panasonic S1H, GH6 e S5M2 tramite un cavo opzionale USB-C Run/Stop. Altri sistemi di telecamere verranno aggiornati in futuro con un firmware compatibile.
Il Lens-Mapping-Kontrollbildschirm fornisce informazioni sulla messa a fuoco in tempo reale, in modo che tu possa essere informato su ogni immagine e controllare i comandi, senza che sia necessario marcare un’immagine di fuoco. L’Akku interno, che viene versato tramite USB-C con Strom, offre, a partire da 20 giorni di utilizzo, un’autonomia senza interruzioni. (ma non sul firmware attuale)
Grazie a un motore di sollevamento, il Nano II offre un’elevata velocità di rotazione dei suoi dispositivi e si avvale di pratiche cinghie di collegamento USB-C, che sono perfette per l’installazione di più motori su un’unica centralina.
Il Nano II è il nostro sistema più compatibile con la compatibilità con DJI RS2, RS3 Pro, DJI Focus Motors, Nucleus M (senza le guide manuali) e con la generazione precedente del Nucleus Nano, che consente di ottenere una maggiore flessibilità per gli utenti che utilizzano le versioni precedenti dell’ecosistema Nucleus.
Tieni presente che per l’integrazione con Nucleus M Handgriffen, Advanced Side Focus Griffen, DJI Ronin e Ronin Focus Motoren è necessario un hardware diverso, che non è presente nel kit.
Migliora il tuo lavoro con il sistema di controllo dell’obiettivo senza fili Nucleus Nano II. Approfittate della gestione ottimale dei vostri oggetti, dell’intuitività del pannello di controllo e della compatibilità con l’attrezzatura di rete.
BITTE BEACHTEN SIE: Alcune delle funzioni indicate in precedenza sono completamente funzionanti nel firmware attuale.
Lens Mapping e altre funzioni non sono ancora disponibili e verranno implementate con gli aggiornamenti del firmware di prossima pubblicazione. L’opzione Kamerasteuerungs è compatibile solo con le fotocamere ausiliarie.
Le Griffe Nucleus M per la mano sinistra e la mano sinistra e le Griffe Advanced Side Focus sono assolutamente compatibili con il motore Nano II e sono dotate di un hardware diverso, che può essere montato separatamente.
Funzionamenti come la compatibilità con il motore DJI Ronin/DJI Focus non sono ancora disponibili e richiedono un hardware diverso e separato.
**Le fotocamere Canon e Sony sono compatibili solo con il cavo PD USB-C e le fotocamere Black Magic Design solo con il Bluetooth**.
Con l’utilizzo di adattatori per oggetti: La funzionalità Bluetooth del Nano II è possibile solo se si utilizzano oggetti originali per l’adattatore in questione.
L’alterazione della NATO per la barriera di sicurezza è prevista solo per il Nano II Handrad. Se non vuoi che ti venga consegnato un altro Zubehör su questa NATO-Halterung, rischierai di subire un’alterazione dei dati di contatto.
Consigliamo di utilizzare solo la Sony Serie L F550 per il montaggio di una macchina da presa. La compatibilità con altri marchi non è garantita.
Wireless control works well, and the motor power is sufficient to move the zoom lens when using PD input.
Let’s list the inconveniences:
1.There is no information like in beta testing. There are many functions that are not supported (in the case of Sony, only PC control is possible through a C-type cable connection to the motor – Bluetooth and wifi control functions are not available).
Even though it has been a long time since the 240124 firmware was released, the website does not indicate what the update is, but only says that the 231223 firmware is the latest.
2. The touch lock button keeps being released. It seems that the lock is automatically released after some time has passed after setting the lock.
You should be able to set the touch lock time as an option (e.g. 1 minute, 10 minutes, 15 minutes, until press unlock).
Thank you for your feedback and sorry to hear about your issues with the system so far! We are working on adding as much functionality via firmware updates as possible and there will be new firmware soon!
Please contact our support team to help with the lock screen issue as this does not sound normal: support@tilta.com
I( didnt realize there is no battery in the power handle? Seems like a very specific & strange battery?
Hey Brook! Unfortunately batteries are not included with the handle as noted by the Packing List and technical information on the product page.
The Power Handles uses a Sony F550 battery which is fairly common and should be easy enough to find!
Please contact our support team for further assistance: support@tilta.com
The device I received was in excellent condition; however, I encountered a problem while performing a firmware update. The update process became stuck, requiring me to power off and restart the device three times to successfully complete the update.
Better, more interactive and integrated battery awesome, however seems like an unfinished product in the software department. Essentials like a battery charging indicator are missing, which I solve by powering up the unit and charging while on so I 1) can see if it’s charging and 2)what’s the charging percentage.
The actual wheel on the FiZ seems too stiff at times. The previous version was almost too loose. A middle ground would be perfect.
FiZ lacks a kink or somewhat of a physical mark on the housing so the focus puller can feel his center mark as a reference point. Previous version had a kink. For me, pulling focus and operating by myself in videography, this is essential and I have no reference option right now.
Theres no clear way in the instructions to power down or up for that matter.
You can hold the REC button the Hand Wheel to power up or power down the unit!
More information can be found here in our setup and installation guide:
https://www.youtube.com/watch?v=UCEPWLFOFC8&ab_channel=TILTA