Use this table to have a quick reference for functionality on the Hydra Arm Mini. A PDF version is available for printing or read more below.
| Button Name | Function | Operation Process |
|---|---|---|
|
Frontal Horizontal Setting Button |
Adjust the Mini Arm to be horizontally aligned to the front direction |
Set the front direction as needed |
|
Pan Limit Setting |
Define the operational range of the Pan axis. |
First, set the left point (Point A), then set the right point (Point B). If the position limiting red line is not displayed, it means the horizontal position limiting is disabled. |
|
Tilt Limit Setting |
Define the operational range of the Tilt axis |
First, set the high point (Point A), then set the low point (Point B). Pay attention to the low point to prevent the device from touching the ground. |
|
Left-Right Control Setting |
Configure the control gesture for left and right movement |
During the setup, perform slow tests to prevent incorrect gesture settings that could lead to accidents. |
|
Direction Setting |
Define the arm’s rotation direction, Set the Mini Arm’s direction of rotation |
During configuration, test slowly to avoid incorrect direction settings that might result in unintended operations. |
|
Pro Mode and Normal Mode |
In Pro Mode, you can only control the arm. In Normal Mode, the gimbal can also be controlled. |
When in Normal Mode, first test control of the arm and then proceed to test gimbal control. |
|
Load Setting |
Coming Soon |
|
|
Stabilization Setting |
Enhances stabilization |
It’s turned off by default and should be activated by the user as required. |
|
Factory Reset |
Revert to factory settings |
A password is needed to initiate the factory reset. |
|
Joystick Calibration |
Press this if you notice the Mini Arm drifting. |
When calibrating, ensure hands are off the joystick, letting it rest in its central position. |
|
Gyro Calibration |
Align the Tilt axis of the Mini Arm horizontally. |
If the Mini Arm appears level but the on-screen Tilt indicator is off, calibrate. Ensure the Mini Arm remains visually horizontal during the process. |
|
Language Switch |
Switch between Chinese and English. |
|
|
Pan UI Calibration |
Correct the mismatch between the Pan indicator and the Mini Arm. |
Hold down the record button, then select Pan UI Calibration to align the Mini Arm’s horizontal direction with the indicator. |
|
Tilt UI Calibration |
Correct the mismatch between the Tilt indicator and the Mini Arm. |
Hold down the record button, then select Tilt UI Calibration to align the Mini Arm’s vertical direction with the indicator. |
|
Upgrade |
Update the Remote’s Firmware |
When a new firmware is available, connect the remote to a computer using a TYPE-C cable. Transfer the firmware to the remote and power it on to initiate the upgrade. |
|
Wheel Calibration |
Calibrate for Head Drift |
When the head axis managed by the wheel starts to drift, you can proceed with the wheel calibration. |
|
EZ Mode |
Connect to Heads |
(+10 rating, 2 votes)
Loading...