Description
- [INCREASED STABILITY] Plus de stabilité et de contrôle lors de l'utilisation du Ronin
- [RONIN CONTROL] Prise en charge du contrôle total des RS2 et RS3 Pro
- [LIGHTWEIGHT] La veste de soutien redistribue le poids pour une utilisation plus confortable sur de plus longues durées.
- [INCREASED BATTERY] Les multiples options d'alimentation permettent d'augmenter l'autonomie de la batterie du Ronin
- [COMPATIBILITY] Supporte n'importe quel Gimbal qui se connecte avec un filetage 1/4"-20 et peut être alimenté via un Lemo 2 Pin.
*La livraison gratuite ne s’applique pas à cet article. Le système Tilta Float fonctionne en conjonction avec les DJI RS 2 et RS3 Pro pour fournir un système de stabilisation de caméra petit et compact qui vous permet de réaliser des mouvements de caméra fluides et cinématographiques avec des configurations de caméra plus petites.
Le poteau à contrepoids offre une stabilisation supplémentaire à votre installation au-delà de ce que le cardan fait déjà pour permettre le mouvement le plus fluide possible de la caméra.
Le bras à ressort et la conception de la veste de soutien font reposer le poids de l’appareil sur votre torse, ce qui permet de prolonger la durée d’utilisation avant que l’utilisateur ne se fatigue.
Le contrôleur sans fil pour le pouce inclus vous permet de contrôler sans fil le Ronin ainsi qu’un moteur de suivi de la mise au point Nucleus M ou Nucleus Nano.
Cette unité est conçue pour être montée sur l’étrier de votre Tilta Float via le support de moniteur du système.
Le contrôleur s’alimente via des batteries Go Pro 5-8 et dispose d’un port USB-C qui peut être utilisé pour les futures mises à jour du micrologiciel. Veuillez noter que nous ne recommandons pas d’alimenter l’appareil par ce port.
Le support lombaire et la sangle d’épaule unique inclus assurent une répartition supplémentaire du poids et garantissent une utilisation confortable quelle que soit la durée de l’opération. Les options d’alimentation multiples offrent une plus grande flexibilité lors de l’alimentation du Ronin. Le système peut alimenter le gimbal via Gold Mount, V-Mount, TB50, ou le Battery Handle lui-même via des accessoires optionnels.
*Le Float est compatible avec n’importe quel gimbal dont le poids est inférieur à la limite et qui peut être monté via un filetage 1/4″-20 et peut être alimenté par un Lemo à 2 broches ou une batterie interne. Cependant, il ne peut contrôler sans fil que le RS2 et le RS3 Pro.
**Le Float n’a pas d’autres sorties d’alimentation que le Lemo à 2 broches conçu pour alimenter le RS2**.
***Le câble interne peut supporter 14,8V et 3A avec une capacité maximale de 6A***.
RS3/RS3 Pro : La clé M n’est PAS en mesure d’imiter la fonction du cardan. La touche M de cet appareil permet UNIQUEMENT de modifier le réglage du mode. Il n’est PAS recommandé d’utiliser des cardans plus grands que ceux que l’on pourrait classer comme “de poche”, comme le Movi Pro. Même si le poids total est inférieur à 10 kg, le système aura du mal à supporter des cardans physiquement plus grands que les cardans de la série DJI Ronin RS.
Fantastic feel and almost intuitive to use. Very ergonomic.
I would have loved to use my Dji gimbal with this, but parts were missing and it was impossible to put together. When I had to return it, I had to pay close to $70 to ship it back since I bought it directly from the company’s website and not Amazon. Some little screws and springs were just randomly in the box and I didn’t know where those springs came out of. I got a full refund, minus about 30$ so I lost around $100 on this adventure. it was worth it though. I think the idea is amazing and much cheaper than Ariri Trinity system. It made me look into other systems that won’t require batteries. Another downside to this was that the battery was not included. So not only were a lot of parts missing, but the batteries were not included and it felt that I would have to gather bits and pieces of parts from all over the place to be able to put this thing together. It would be nice is this Tilta Float came with everything included to put the system together.
I would appreciate it if the shipping to Hawaii weren’t an arm and a leg. There are considerations for foreign shipments. Perhaps a different carrier for Hawaii and Alaska. Also, the support with assembly and balancing is either third party or in Chinese. One would think that there are enough sales to English speaking countries to properly support this product, affording the English speaking buyers the respect that any customer deserves. Its not like producing an English version is difficult for Tilta.
Fantastic. Takes some time to learn. But once you get it you’ll be amazed. The advance ring is probably the better overall equipment for most people. But I wanted to try out the float.
This is my first stabilizer. I researched it from the time it came out before I made a decision. It is very well made! It took a bit of experimenting to figure out what side I wanted the arm to be on as I am right handed, I figured that was were it should be but found the inverse worked much better. As for balancing, where the hell do you get a stand? I must be calling it the wrong thing as I can’t seem to get any results in a search.
So I tried some various tests to see how this thing reacted. I was very impressed that I could walk up and down a flight of stairs with practically no bounce! I have a Ronin 1, which I still love and an RS2. This is going to save my shoulders!
Now to the flaw: there is a supplied back extension to support the weight on the upper back. The only problem is that it covers an area about the size of one vertebra and puts a LOT of pressure on that resting point. I would suggest increasing the size of this pad and giving it a bit of a curve to conform to the spine. The reason being that the fastening point of the arm creates torque at the center point of the back of the vest, forcing more leverage on the extender. If the back rest were larger, the weight could be distributed over a larger area resulting in less pounds per square inch. I will be making one out of carbon fiber and then of course covering one side with foam.
All that aside, I’m really going to enjoy this thing!