Beschreibung
- [INCREASED STABILITY] Sorgt für mehr Stabilität und Kontrolle bei der Bedienung des Ronin
- [RONIN CONTROL] Unterstützt die volle Kontrolle über den RS2 und RS3 Pro
- [LIGHTWEIGHT] Die Stützweste verteilt das Gewicht für eine komfortablere Bedienung über längere Zeiträume hinweg
- [INCREASED BATTERY] Mehrere Stromversorgungsoptionen sorgen für eine längere Akkulaufzeit des Ronin
- [COMPATIBILITY] Unterstützt jeden Gimbal mit 1/4"-20 Gewinde und kann über einen 2-Pin Lemo mit Strom versorgt werden
*Der kostenlose Versand gilt nicht für diesen Artikel*. Das Tilta Float System bietet in Verbindung mit dem DJI RS 2 und RS3 Pro ein kleines, kompaktes Kamera-Stabilisierungssystem, mit dem Sie auch mit kleineren Kamera-Setups flüssige Kamerafahrten durchführen können.
Der auf einem Gegengewicht basierende Pfosten stabilisiert Ihr Setup zusätzlich zu dem, was der Gimbal bereits tut, um eine möglichst reibungslose, fließende Kamerabewegung zu ermöglichen.
Das Design der gefederten Arme und der Stützweste verlagert das Gewicht des Rigs auf Ihren Oberkörper und ermöglicht so längere Einsatzzeiten, bevor der Benutzer ermüdet.
Mit dem mitgelieferten Wireless Thumb Controller können Sie sowohl den Ronin als auch einen Nucleus M oder Nucleus Nano Follow Focus Motor drahtlos steuern.
Dieses Gerät ist für die Montage am Bügel Ihres Tilta Float über die Monitorhalterung des Systems vorgesehen.
Der Controller wird über Go Pro 5-8 Batterien betrieben und verfügt über einen USB-C-Anschluss, der für zukünftige Firmware-Updates genutzt werden kann. Bitte beachten Sie, dass wir nicht empfehlen, das Gerät über diesen Anschluss zu betreiben.
Die im Lieferumfang enthaltene untere Rückenstütze und der einzelne Schultergurt sorgen für eine zusätzliche Gewichtsverteilung, die ein komfortables Arbeiten über eine beliebige Dauer hinweg ermöglicht. Mehrere Stromversorgungsoptionen sorgen für mehr Flexibilität bei der Stromversorgung des Ronin. Das System kann den Gimbal über Gold Mount, V-Mount, TB50 oder den Batteriegriff selbst über optionales Zubehör mit Strom versorgen.
*Der Float ist mit jedem Gimbal unter dem Gewichtslimit kompatibel, der über ein 1/4″-20 Gewinde montiert werden kann und über 2 Pin Lemo oder eine interne Batterie mit Strom versorgt werden kann. Allerdings kann er nur den RS2 und RS3 Pro drahtlos steuern.
**Der Float hat keine anderen Stromausgänge als den 2 Pin Lemo, der für die Stromversorgung des RS2 vorgesehen ist**.
***Das interne Postkabel ist für 14,8V und 3A ausgelegt und kann bis zu 6A verarbeiten***.
RS3/RS3 Pro: Die M-Taste ist NICHT in der Lage, die Funktion des Gimbals zu imitieren. Mit der Taste M auf diesem Gerät können Sie NUR die Moduseinstellung ändern. Es wird NICHT empfohlen, Gimbals zu verwenden, die größer sind als das, was man als “handgehalten” bezeichnen könnte, wie das Movi Pro. Selbst wenn das Gesamtgewicht unter 10 kg liegt, wird das System Schwierigkeiten haben, Gimbals zu unterstützen, die größer sind als die DJI Ronin RS Series Gimbals.
Fantastic feel and almost intuitive to use. Very ergonomic.
I would have loved to use my Dji gimbal with this, but parts were missing and it was impossible to put together. When I had to return it, I had to pay close to $70 to ship it back since I bought it directly from the company’s website and not Amazon. Some little screws and springs were just randomly in the box and I didn’t know where those springs came out of. I got a full refund, minus about 30$ so I lost around $100 on this adventure. it was worth it though. I think the idea is amazing and much cheaper than Ariri Trinity system. It made me look into other systems that won’t require batteries. Another downside to this was that the battery was not included. So not only were a lot of parts missing, but the batteries were not included and it felt that I would have to gather bits and pieces of parts from all over the place to be able to put this thing together. It would be nice is this Tilta Float came with everything included to put the system together.
I would appreciate it if the shipping to Hawaii weren’t an arm and a leg. There are considerations for foreign shipments. Perhaps a different carrier for Hawaii and Alaska. Also, the support with assembly and balancing is either third party or in Chinese. One would think that there are enough sales to English speaking countries to properly support this product, affording the English speaking buyers the respect that any customer deserves. Its not like producing an English version is difficult for Tilta.
Fantastic. Takes some time to learn. But once you get it you’ll be amazed. The advance ring is probably the better overall equipment for most people. But I wanted to try out the float.
This is my first stabilizer. I researched it from the time it came out before I made a decision. It is very well made! It took a bit of experimenting to figure out what side I wanted the arm to be on as I am right handed, I figured that was were it should be but found the inverse worked much better. As for balancing, where the hell do you get a stand? I must be calling it the wrong thing as I can’t seem to get any results in a search.
So I tried some various tests to see how this thing reacted. I was very impressed that I could walk up and down a flight of stairs with practically no bounce! I have a Ronin 1, which I still love and an RS2. This is going to save my shoulders!
Now to the flaw: there is a supplied back extension to support the weight on the upper back. The only problem is that it covers an area about the size of one vertebra and puts a LOT of pressure on that resting point. I would suggest increasing the size of this pad and giving it a bit of a curve to conform to the spine. The reason being that the fastening point of the arm creates torque at the center point of the back of the vest, forcing more leverage on the extender. If the back rest were larger, the weight could be distributed over a larger area resulting in less pounds per square inch. I will be making one out of carbon fiber and then of course covering one side with foam.
All that aside, I’m really going to enjoy this thing!