KOSTENLOSER VERSAND nach Europa bei Bestellungen über 150 Euro(Ausgenommen Bestellungen, die aus China versendet werden müssen). Es gelten die Allgemeinen Geschäftsbedingungen.

Mehr erfahren →
-10%

Nucleus Nano II Steuergriff

Kostenloser Versand bei EU-Bestellungen über 150 € (Ausgenommen sind Bestellungen, die einen Versand aus China erfordern) Mehr Infos →
( Einige Artikel sind aufgrund ihres Gewichts ausgeschlossen)
2 Rezensionen

UVP: -10%134,10 
159,58  Bruttopreis

Nur noch 1 vorrätig (kann nachbestellt werden)

Artikelnummer: WLC-T05-CH Kategorie:
EAN 6937134606959

Returns are accepted within 21 days, with some exceptions. Mehr Infos →



Nucleus Nano II Steuergriff
Nucleus Nano II Steuergriff
Nucleus Nano II Drahtloses Objektiv-Steuerungssystem
Nucleus Nano II Steuergriff
Nucleus Nano II Steuergriff

Beschreibung

  • [NUCLEUS SUPPORT] Geeignet für die Steuerung des Nucleus Nano II, Nucleus M und Nucleus Nano
  • [DUAL MOTOR CONTROL] über das Fokusrad und den Motor-kompatiblen Joystick
  • [EXPANDED POWER] für das Nano II Handrad über die NATO Mount Kontaktstifte
  • [MOUNTING POINTS] Perfekt für Schulter-Riggs oder zur Montage externer Monitore
  • [GIMBAL READY] Unterstützt DJI RS2 und RS3 Pro über ein optionales drahtloses Empfängermodul

Wir stellen den Nucleus Nano II Steuergriff vor!

Erleben Sie unvergleichliche Flexibilität mit der Fähigkeit des Nano II, bis zu 4 Motoren für Fokus, Iris, Zoom und Mirage VND zu bedienen, wenn Sie diesen Steuergriff und das Handrad verwenden!

Dieser Griff wird mit einem Akku der Sony L-Serie (F550/570) betrieben und kann Strom an das Nucleus Nano II Handrad senden, um die Lebensdauer des Akkus zu verlängern.

Der Steuergriff verfügt über ein Fokusrad auf der Vorderseite, mit dem Sie die Motoren der Nucleus Serie und sogar den DJI Fokusmotor steuern können (erfordert ein optionales drahtloses Empfängermodul).

Dieses drahtlose Empfängermodul (nicht im Lieferumfang enthalten) kann auch verwendet werden, um diesen Griff mit dem DJI RS2 oder RS3 Pro zu verbinden, um ihn drahtlos zu bedienen.

Der Griff kann unabhängig vom Nano II Handrad verwendet werden und kann zwei Motoren der Nucleus Serie über das Fokusrad und den Joystick steuern, wenn kein Gimbal gesteuert wird.

Der Griff verfügt über ein 1/4″-20 Gewinde mit Aufnahmepunkten, die sich perfekt für die Montage unseres rechtwinkligen Rosettenadapters eignen, um diesen Griff einfach in ein Schulter-Rig-Setup zu integrieren.

An der Oberseite des Griffs befindet sich außerdem ein Kaltschuh-Empfänger, der mit unserer optionalen Kaltschuhhalterung für einen externen Monitor verwendet werden kann, um in Verbindung mit dem Handrad die perfekte Station zum Fokussieren zu schaffen.

HINWEIS: Die NATO-Halterung ist nur für das Nano II Handrad vorgesehen. Schließen Sie kein anderes Zubehör über diese NATO-Halterung an, da Sie sonst Gefahr laufen, die Kontaktstifte zu beschädigen.

Wir empfehlen, nur Sony L-Series F550 Akkus zu verwenden. Die Kompatibilität mit anderen Marken wird nicht garantiert.

1:Nucleus Nano II Control Handle
2:USB-C Power Cable (30cm) (21114.00061.00.00)*1
3:Instruction Manual *1
4:Alley Key(32123.00071.00.00) *1

Dimensions: 19.05 x 13.97 x 8.89 cm

Weight: 0.5 kg

Materials: Aluminum-alloy, stainless steel

Colour: Black

Optional Accessories

Eine Rezension verfassen
Nucleus Nano II Steuergriff Nucleus Nano II Steuergriff
Bewertung*
0/5
* Bewertung ist erforderlich
* Title is required
Deine Rezension *
* Rezension ist erforderlich
Name *
* Name ist erforderlich
Add photos or video to your review

Customer Reviews

4,5
Basierend auf 2 Bewertungen
5 Sterne
50
50%
4 Sterne
50
50%
3 Sterne
0%
2 Sterne
0%
1 Stern
0%

Eine Frage stellen

Vielen Dank für die Frage!

Deine Frage ist eingegangen und wird bald beantwortet. Bitte reiche die gleiche Frage nicht noch einmal ein.

Fehler

Warning

Beim Speichern deiner Frage ist ein Fehler aufgetreten. Bitte melde ihn dem Website-Administrator. Zusätzliche Informationen:

Eine Antwort hinzufügen

Vielen Dank für die Antwort!

Deine Antwort ist eingegangen und wird bald veröffentlicht. Bitte reiche die gleiche Antwort nicht noch einmal ein.

Fehler

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

1-2 of 2 reviews
  1. GS
    GS
    The nucleus nano control 2 is amazing!!!

    I am a filmmaker based out of DC and I use the nucleus nano control II paired with a nucleus nano II on my Red and Canon cinema cameras. It is amazing

    (0) (0)
  2. A
    A
    First experience

    It was a bit dificult because the sarten is a bit small, the setup is easyJet when you Knowles the way, but you must watch a los the videos on Internet because the manual is a bit confuse. At the end I will buy the tem again because is solid and run well with the ficus motor without the nano nucleus. Its simple and useful. Great job.

    (0) (0)
    • T
      T

      Thank you for the feedback! Please feel free to reach out to our support team with any questions: support@tilta.com

B
Bartek 03/09/2024
1. Does the front dial have hard stops of any kind?2. In order to allow for quick setup changes I'd like to pair both the hand wheel and the handle to the same two motors. I'd use the hand wheel attached to my tripod handle when in tripod mode, then for shoulder work I'd just take the camera off the tripod and use the control handle in place of a shoulder rig handle. Would this work seamlessly, or would I have to re-calibrate the wheel and the handle each time I switch in order to account for the difference between the wheel/dial position vs motor position due to alternating between which I use for controlling a given motor? I'd love to be able to just grab my camera off the tripod and keep shooting, without having to worry about re-calibration.
T
Tilta beantwortet am 03/11/2024

1. Yes the front dial has hard stops! 2. As long as you don't have both controllers powered on at the same time, you will not need to calibrate the motor when switching controllers! Please contact our support team for more information: sales-de@tilta.com

(0) (0)
B
Niccol¨° 02/01/2024
Is it possible to control the DJI Ronin RS3 with the Nucleus Nano II Control Handle?
T
Tilta beantwortet am 02/01/2024

Yes! When using the Wireless Receiver Module you are able to control the DJI RS3 Pro with this handle: wireless-control-receiver-module-for-rs-2/

(0) (0)
B
Justin K. 01/11/2024
Hi, I'm thinking about buying both the Nano 2 control handle and wheel controller to operate my DJI RS2 and the DJI focus motor, along with my Sony A9M2 principally for photography, not video. I wanted to know the following things before buying:1. How much control would the wheel and handle have on the Sony A9M2? Is it limited, and if so, what are those limitations? I understand you don't have full compatibility/control of all Sony cameras at present and wanted to know if there were limitations to that control for that camera? And are there plans to make it compatible if it isn't already?2. Do I need to buy an additional Tilta Wireless Control Receiver Module TGA WCR in order to make this control the RS2 Gimbal wirelessly? Or does it come with a wireless receiver already?3. Using both the wheel controller and the control handle, am I able to control a Sony camera (preferably the A9M2) and the RS2 Gimbal at the same time without having to change settings/connections?
T
Tilta beantwortet am 01/12/2024

The Sony a9 II is not currently supported so we are not able to confirm what settings will be available to control. We are hoping to add more support for Sony cameras in the future, but we cannot guarantee a specific model at this time. This Wireless Receiver Module is not included will need to be used in order to connect this handle to the DJI RS2 or RS3 Pro in order to wirelessly operate it.Theoretically, if the Nano II is updated to support this camera, you would be able to change settings on the camera while controlling the gimbal at the same time!

(0) (0)
B
Andreas M. 01/02/2024
Is it possible to update the firmware of the side handle without owning the handwheel? How? Thanks for providing an updater or downloadble firmware version.
T
Tilta beantwortet am 01/02/2024

Yes! We will be updating our website with this separate file very soon! https://eu.tilta.com/de/support/nucleus-nano-ii-firmware-changelog/In the meantime please contact our support team if you need this updated asap: sales-de@tilta.com

(0) (0)
B
Jax 12/28/2023
Is there a setting to control the sensitivity of the front dial?
T
Tilta beantwortet am 01/16/2024

There is not a sensitivity setting on this dial, as the sensitivity will be directly related to the end points of the motor! You could theoretically calibrate the motor farther than the throw of the lens in order to make it more sensitive or stop the motor from fully calibrating in order to make it less sensitive, but that would have some large limitations. Please contact our support team for more information about this workaround if you are interested: sales-de@tilta.com

(0) (0)

Eine Frage stellen

Vielen Dank für die Frage!

Deine Frage ist eingegangen und wird bald beantwortet. Bitte reiche die gleiche Frage nicht noch einmal ein.

Fehler

Warning

Beim Speichern deiner Frage ist ein Fehler aufgetreten. Bitte melde ihn dem Website-Administrator. Zusätzliche Informationen:

Eine Antwort hinzufügen

Vielen Dank für die Antwort!

Deine Antwort ist eingegangen und wird bald veröffentlicht. Bitte reiche die gleiche Antwort nicht noch einmal ein.

Fehler

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: