Descripción
- [PROTECTIVE ARMOR] para BMPCC 6K Pro/G2 Minimiza el desgaste con el paso del tiempo
- [MOUNT ACCESSORIES] mediante raíl OTAN, rosetas compatibles con Arri, receptores de zapata fría, roscas 1/4"-20 con pasadores de fijación
- [QUICK RELEASE TOP HANDLE] Proporciona más flexibilidad en el manejo y la manipulación
- [RECORD TO SSD] mediante el soporte para unidad Samsung T5 y el cable USB-C montable
- [15MM ROD SUPPORT] Cuando se utiliza el soporte de extensión de la empuñadura de la batería
Arma tu cámara con la Jaula de Cámara Tiltaing para las cámaras Blackmagic Pocket Cinema Camera 6K Pro y 6K G2.
Este Kit básico para la BMPCC6K Pro/G2 proporciona un blindaje protector para el cuerpo de la cámara e incluye algunos accesorios relevantes para mejorar su funcionalidad.
La Jaula Completa ofrece varias roscas de 1/4″-20 con pasadores de fijación, receptores de zapata fría, un Raíl OTAN para Asas Laterales de Tipo IV y VI, así como Puertos de Fijación de Cañas para nuestros Portacañas Individuales.
También cuenta con rosetas compatibles con ARRI, diseñadas específicamente para nuestra Asa Superior Ajustable Plus, para un manejo y una manipulación más flexibles.
El módulo del brazo derecho puede retirarse para convertir esta Jaula Completa en una Media Jaula.
Esto ofrece más flexibilidad en situaciones en las que se requieren construcciones más ligeras, como cuando se utiliza un cardán.
La placa inferior proporciona varios puntos de montaje de ¼”-20 para fijar tu cámara a varias placas de liberación rápida y es compatible con el receptor ARCA de la placa de montaje RS2.
Cuando se utiliza la Media Jaula, la placa inferior puede extenderse para soportar la Empuñadura de Batería Black Magic Design.
Se puede instalar un soporte de varilla de 15 mm incluido para apoyar varillas de 15 mm delante del cuerpo de la cámara cuando se utiliza la empuñadura de batería en la configuración de media jaula.
El asa superior de liberación rápida incluida puede fijarse a la parte superior de la jaula mediante un receptor de zapata fría y un tornillo de ¼”-20.
Esto proporciona una conexión extremadamente segura para manejar y operar cómodamente tu sistema de cámara.
El asa superior incorpora roscas adicionales de ¼”-20, receptores de zapata fría y un soporte de varilla horizontal de 15 mm para montar monitores externos o EVF.
El soporte de la unidad SSD se fija directamente a la jaula mediante un tornillo 1/4″-20 y un pasador de fijación.
A continuación, puede sujetarse a una unidad SSD Samsung T7, fijándola a la configuración de tu cámara y permitiéndote grabar secuencias en una tarjeta SSD independiente.
El cable USB-C incluido puede enroscarse en el soporte del SSD y en el panel lateral de la jaula, cerca del puerto USB-C.
Esto crea una conexión extremadamente segura entre tu cámara y la unidad.
El Adaptador HDMI de 90 grados se monta en la jaula cerca del puerto HDMI de la cámara y ofrece una conexión segura que limita el desgaste del propio puerto.
NOTA: Si recibes un kit con un soporte T7, ponte en contacto con nosotros en: sales-de@tilta.com
Tilta came out of the gate, being the first to offer cage support for the battery grip. However, be aware that on the bottom there is only ONE 1/4″ thread that is in the center of the lens. Most people who get a rig will build it out enough where the weight will rotate the camera after normal use. It didn’t take much for the cam to swing left and right. Other than that, the build quality and versality is pretty great. Now, being close to end of 21, it didn’t take long for smallrig to not only catch up with a full battery grip cage offering. Additionally, they are now pre-releasing a cage that secures around just the camera, and allows you to pop on and off the battery grip (SM3517). Returning my tilta for this one.
Im disappointed that its only a half cage when using the battery pack. However, its a good product.
Overall the Cage is a winner. Delivery was timely-ish considering I live in Ireland. And the cage is functional, well made and finished beautifully.
I have two gripes; firstly the basic kit comes with a SSD holder which is partly the reason I upgraded to the basic kit. However the SSD holder is for the Samsung T7 not the T5… This is something that I missed when purchasing (so my bad) but in my opinion its a pretty easy mistake to make given that the T7 drive is not supported by the BMPCC6KP and the drives have the difference of a letter in their two names (T5 vs T7)…all this amounts to me now having a drive holder (which I paid for) which doesn’t fit my current SSD and doesn’t fit an SSD supported by the camera system….EHHHHH
Secondly, when you use the strain relief cables for the HDMI and USB-C ports it makes plugging OUT the Dtap power cable impossible without removing the USB-C cable (which means unscrewing) which is totally unpractical in every way.
Is there a workaround for this problem?
Apart from those two significant issues…The cage is great
In principle I like this cage as I will use this camera 90% of the time with the additional battery grip and this allows me to do that over other cages (looking at you smallrig).
That said, It’s only a half cage in this mode and there’s no quick way to switch between battery grip on and battery grip off which is a little annoying.
More annoying than anything though is just how snug everything is. It takes me an age to get the t7 drive into the holder as it’s been cut just toooooooo tight. an extra 1/2mm would literally change everything – it looks anyway – it weren’t gonna slip.
In addition to that the cold-shoe mounts suffer from the same issue of being cut so exact there’s little room for actually getting cold-shoe mounting things into it without fear of breaking it.
The same can be said of the usbc and hdmi adapter.
So whilst I like having a cage, I do not think this is the best one as it has some manufacturing issues that suggest, whilst technically and mechanically correct, it skipped the practical user-testing to iron out some very annoying and frequently noticeable issues.
I hope Titla see this review and look into this as they are such simple fixes to overcome.
(I will however say that I’ve had 0 issues using the actual t7 drive with my BMPCC6kPro – recorded 4 projects on it now and it hasn’t let me down once)
The HDMI angle adapter does not fit well. My 90-degree USB-C cable has connectivity quality issue.