Beschreibung
- [PROTECTIVE ARMOR] für BMPCC 6K Pro/G2 Minimiert Verschleiß und Abnutzung im Laufe der Zeit
- [MOUNT ACCESSORIES] über NATO-Schiene, Arri kompatible Rosetten, Cold Shoe Aufnahmen, 1/4"-20 Gewinde mit Fixierstiften
- [QUICK RELEASE TOP HANDLE] Bietet mehr Flexibilität bei Bedienung und Handhabung
- [RECORD TO SSD] über die Samsung T5 Laufwerkshalterung und das montierbare USB-C Kabel
- [15MM ROD SUPPORT] Bei Verwendung des Verlängerungshalters für den Batteriegriff
Bewaffnen Sie Ihre Kamera mit dem Tiltaing Kamerakäfig für die Blackmagic Pocket Cinema Camera 6K Pro und 6K G2.
Dieses Basic Kit für die BMPCC6K Pro/G2 bietet eine Schutzhülle für das Kameragehäuse und enthält einige wichtige Zubehörteile zur Verbesserung der Funktionalität.
Der Full Cage bietet mehrere 1/4″-20 Gewinde mit Fixierstiften, Kaltstartaufnahmen, eine NATO-Schiene für Seitengriffe vom Typ IV und VI sowie Rutenbefestigungsöffnungen für unsere Einzelrutenhalter.
Er ist außerdem mit ARRI-kompatiblen Rosetten ausgestattet, die speziell für unseren Adjustable Top Handle Plus entwickelt wurden und eine flexiblere Bedienung und Handhabung ermöglichen.
Das rechte Armmodul kann entfernt werden, um diesen Vollkäfig in einen Halbkäfig zu verwandeln.
Dies bietet mehr Flexibilität in Situationen, in denen leichtere Konstruktionen erforderlich sind, z. B. bei der Verwendung eines Gimbals.
Die Bodenplatte bietet mehrere ¼”-20 Befestigungspunkte zur Befestigung Ihrer Kamera an verschiedenen Schnellwechselplatten und ist mit dem ARCA-Empfänger der RS2-Montageplatte kompatibel.
Wenn Sie den Half Cage verwenden, kann die Bodenplatte erweitert werden, um den Black Magic Design Battery Grip zu tragen.
Eine mitgelieferte 15-mm-Stangenhalterung kann installiert werden, um 15-mm-Stangen vor dem Kameragehäuse zu befestigen, wenn Sie den Battery Grip in der Halbkäfig-Konfiguration verwenden.
Der mitgelieferte Quick Release Top Handle kann über eine Kaltschuhaufnahme und eine ¼”-20 Schraube an der Oberseite des Käfigs befestigt werden.
Dies bietet eine extrem sichere Verbindung für die komfortable Handhabung und Bedienung Ihres Kamerasystems.
Der Top Handle verfügt über zusätzliche ¼”-20-Gewinde, Kaltschuhaufnahmen und eine horizontale 15-mm-Stangenhalterung für die Montage externer Monitore oder EVFs.
Die SSD-Laufwerkshalterung wird mit einer 1/4″-20 Schraube und einem Fixierstift direkt am Käfig befestigt.
Es kann dann an ein Samsung T7 SSD-Laufwerk geklemmt werden, um es an Ihrer Kameraeinrichtung zu befestigen und Ihnen die Aufnahme von Filmmaterial auf einer separaten SSD-Karte zu ermöglichen.
Das mitgelieferte USB-C-Kabel kann in den SSD-Halter und die Seitenwand des Käfigs in der Nähe des USB-C-Anschlusses geschraubt werden.
Dies schafft eine extrem sichere Verbindung zwischen Ihrer Kamera und dem Laufwerk.
Der 90-Grad-HDMI-Adapter wird am Käfig in der Nähe des HDMI-Anschlusses der Kamera befestigt und bietet eine sichere Verbindung, die die Abnutzung des Anschlusses selbst begrenzt.
HINWEIS: Wenn Sie ein Set mit einem T7-Halter erhalten, kontaktieren Sie uns bitte unter: sales-de@tilta.com
Tilta came out of the gate, being the first to offer cage support for the battery grip. However, be aware that on the bottom there is only ONE 1/4″ thread that is in the center of the lens. Most people who get a rig will build it out enough where the weight will rotate the camera after normal use. It didn’t take much for the cam to swing left and right. Other than that, the build quality and versality is pretty great. Now, being close to end of 21, it didn’t take long for smallrig to not only catch up with a full battery grip cage offering. Additionally, they are now pre-releasing a cage that secures around just the camera, and allows you to pop on and off the battery grip (SM3517). Returning my tilta for this one.
Im disappointed that its only a half cage when using the battery pack. However, its a good product.
Overall the Cage is a winner. Delivery was timely-ish considering I live in Ireland. And the cage is functional, well made and finished beautifully.
I have two gripes; firstly the basic kit comes with a SSD holder which is partly the reason I upgraded to the basic kit. However the SSD holder is for the Samsung T7 not the T5… This is something that I missed when purchasing (so my bad) but in my opinion its a pretty easy mistake to make given that the T7 drive is not supported by the BMPCC6KP and the drives have the difference of a letter in their two names (T5 vs T7)…all this amounts to me now having a drive holder (which I paid for) which doesn’t fit my current SSD and doesn’t fit an SSD supported by the camera system….EHHHHH
Secondly, when you use the strain relief cables for the HDMI and USB-C ports it makes plugging OUT the Dtap power cable impossible without removing the USB-C cable (which means unscrewing) which is totally unpractical in every way.
Is there a workaround for this problem?
Apart from those two significant issues…The cage is great
In principle I like this cage as I will use this camera 90% of the time with the additional battery grip and this allows me to do that over other cages (looking at you smallrig).
That said, It’s only a half cage in this mode and there’s no quick way to switch between battery grip on and battery grip off which is a little annoying.
More annoying than anything though is just how snug everything is. It takes me an age to get the t7 drive into the holder as it’s been cut just toooooooo tight. an extra 1/2mm would literally change everything – it looks anyway – it weren’t gonna slip.
In addition to that the cold-shoe mounts suffer from the same issue of being cut so exact there’s little room for actually getting cold-shoe mounting things into it without fear of breaking it.
The same can be said of the usbc and hdmi adapter.
So whilst I like having a cage, I do not think this is the best one as it has some manufacturing issues that suggest, whilst technically and mechanically correct, it skipped the practical user-testing to iron out some very annoying and frequently noticeable issues.
I hope Titla see this review and look into this as they are such simple fixes to overcome.
(I will however say that I’ve had 0 issues using the actual t7 drive with my BMPCC6kPro – recorded 4 projects on it now and it hasn’t let me down once)
The HDMI angle adapter does not fit well. My 90-degree USB-C cable has connectivity quality issue.